신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
뒤로가기
![공급사 바로가기]()
[OverView]
The Fischer Amps Hardwired In-Ear Belt Pack Amplifier provides high-quality sound amplification to musicians looking for wired, in-ear monitoring. The lightweight amp features a belt clip allowing for a wired monitoring solution that still offers a degree of movement.
The unit features two direct XLR inputs that can be used in stereo or switched for use as two separate mono inputs. With mono inputs consisting of a monitor mix and the performer's instrument or mic, the performer can use the pan knob to control the balance for a custom monitor blend.
A 3.5mm ouput with a volume knob supply in-ear monitors or headphones with 40mW of power per channel for dynamic, high-fidelity soundwith a limiter to ensure players aren't subjected to dangerous volume spikes. The amp can be powered for up to 12 hours on a 9V alkaline battery or 8 hours on an 8.4V NiMH rechargeable battery. The locking DC input connector allows you to use the Fischer Amps DC Mains Adapter (available separately) to power the amp indefinitely if you have access to AC.
UPC: 609465779492
[Specs]
Input Connections : 2 x Neutrik 3-Pin XLR Female Jacks (Locking)
Output Connection : 1/8' / 3.5mm Jack for Headphones/Earphones
Frequency Response : 30 Hz to 20 kHz (2 dB)
Minimum Impedance : Earphones: 12 Ohms per Side
Input Impedance : 15 Kilohms
Audio Input Levels : Nominal Input Level: 0 to +4 dB (Limiter at +6 dB)
Nominal Input Level Balanced: 0 dBV
Maximum Input Level Balanced: +4 dBV
Limiter Input Level Balanced: fro. +5 dBV
Maximum Output Power : 40 mW per Channel at 20 Ohms
Maximum Operating Current : 40 mA
Power : 9 V Block Alkaline Battery or 8.4 V Rechargeable NiMH Battery
DC Power Input : 9 VDC (Pin +, Ring -)
Battery Operating Time : Rechargeable Battery: Approximately 8 Hours with 270 mAh (Depends on Headphone Volume)
Alkaline Battery: Approximately 12 Hours with (Depends on Headphone Volume)
Dimensions : 5 x 3.2 x 1.2' / 127 x 82 x 30 mm
Weight : 10.2 oz / 290 g
[Features]
For Hardwired In-Ear MonitoringFor Keyboardist, Drummer, Backing VocalVolume & Pan/Mix ControlsUp to 12 Hours of Battery Life + AC
PROD번호 : 20010630
정보업데이트 : CV.49327 : 2022-07-13 오후 5:27:24
현재 위치
상품상세 정보
Fischer Amps Hardwired In-Ear Belt Pack Amplifier
(해외배송 가능상품)| 상품명 | Fischer Amps Hardwired In-Ear Belt Pack Amplifier |
|---|---|
| 판매가 | 458,000원 |
| 월 렌탈 금액 |
월 원 (개월 기준)
|
|---|
| 구매방법 | |
|---|---|
| 배송주기 |
정기배송 할인 save
|
| 옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 1개 이하)
사이즈 가이드단독구매상품
TOTAL (QUANTITY)0 (0개)할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
EVENT
[OverView]
The Fischer Amps Hardwired In-Ear Belt Pack Amplifier provides high-quality sound amplification to musicians looking for wired, in-ear monitoring. The lightweight amp features a belt clip allowing for a wired monitoring solution that still offers a degree of movement.
The unit features two direct XLR inputs that can be used in stereo or switched for use as two separate mono inputs. With mono inputs consisting of a monitor mix and the performer's instrument or mic, the performer can use the pan knob to control the balance for a custom monitor blend.
A 3.5mm ouput with a volume knob supply in-ear monitors or headphones with 40mW of power per channel for dynamic, high-fidelity soundwith a limiter to ensure players aren't subjected to dangerous volume spikes. The amp can be powered for up to 12 hours on a 9V alkaline battery or 8 hours on an 8.4V NiMH rechargeable battery. The locking DC input connector allows you to use the Fischer Amps DC Mains Adapter (available separately) to power the amp indefinitely if you have access to AC.
UPC: 609465779492
[Specs]
Input Connections : 2 x Neutrik 3-Pin XLR Female Jacks (Locking)
Output Connection : 1/8' / 3.5mm Jack for Headphones/Earphones
Frequency Response : 30 Hz to 20 kHz (2 dB)
Minimum Impedance : Earphones: 12 Ohms per Side
Input Impedance : 15 Kilohms
Audio Input Levels : Nominal Input Level: 0 to +4 dB (Limiter at +6 dB)
Nominal Input Level Balanced: 0 dBV
Maximum Input Level Balanced: +4 dBV
Limiter Input Level Balanced: fro. +5 dBV
Maximum Output Power : 40 mW per Channel at 20 Ohms
Maximum Operating Current : 40 mA
Power : 9 V Block Alkaline Battery or 8.4 V Rechargeable NiMH Battery
DC Power Input : 9 VDC (Pin +, Ring -)
Battery Operating Time : Rechargeable Battery: Approximately 8 Hours with 270 mAh (Depends on Headphone Volume)
Alkaline Battery: Approximately 12 Hours with (Depends on Headphone Volume)
Dimensions : 5 x 3.2 x 1.2' / 127 x 82 x 30 mm
Weight : 10.2 oz / 290 g
[Features]
For Hardwired In-Ear MonitoringFor Keyboardist, Drummer, Backing VocalVolume & Pan/Mix ControlsUp to 12 Hours of Battery Life + AC
PROD번호 : 20010630
정보업데이트 : CV.49327 : 2022-07-13 오후 5:27:24
| One Color |
REVIEW
게시물이 없습니다
Q&A
게시물이 없습니다
